LCD Digital Plastic Point Melt Flow Indexer MFI Tester
Discription:
The tester can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin,
acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the
melt volume flow rate (MVR) to be determined.
Standards:
GB/T3682-2000,ISO1133-97, ASTM1238
Characteristics:
1) Fast heating speed, very small overshoot.
2) High precision of constant temperature.
3) Can fastly recover to constant temperature condition after padding.
4) Can use maunal and automatical material trimming test method.
5) LCD display, equipment with built-in micro printer, test result can be printed automaticaly.
Specification:
| Machine size(W*H*D) | 250*510*350mm |
| Power | AC220V±10% 50Hz |
| Barrel parameters | Inner hole 9.55±0.025mm |
| Pistons parameters | Piston head: 9.475±0.015mm |
| Piston length | H=6.35±0.1mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| Temperature rangeradius | 400℃ |
| Temperature accuracyblade to jawand dust collector | ±0.2 ℃ |
| Display resolution | 0.1℃ |
| Maximum comsuption | < 600W |
| Temperature recovery time | less than 4 min. |
| Weight accuracy | ±0.5% |
| Basic configuration | 0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
Product Tags:
|
|
LCD Digital Plastic Point Melt Flow Indexer MFI Tester Images
|
